Skip to main content Link Menu Expand (external link) Document Search Copy Copied

A Command List

Appendix A

A.1 SubG-FSK Mode Connection Profile 2 Command List

ABRV / Command Class / ID / OP Code / Source / Destination / Encryption Information Content
JOIN-REQ 0x0 / 0x22F / 0x1 / End Device / Destination / SID_SEC_KEY_WAN_GCM_128 JOIN-REQ message carries requested link characteristics for both uplink and downlink messaging expected on the end device.
1. Uplink Link-Latency Characteristics: Describes the time interval between two uplink opportunities. The value is described in units of slot interval, i.e. 63 ms.
2. Uplink Load Characteristics: Expected traffic rate for each uplink opportunity. The load is mapped to a range of values in interval [0-255], where 0 indicates lowest load and 255 indicates highest load of 1 packet per uplink opportunity.
3. Downlink Link-Latency Characteristics: Describes the time interval between two downlink opportunities. The value is described in units of slot interval, i.e. 63 ms.
4. Downlink Load Characteristics: Expected traffic rate for each DL opportunity. The load is mapped to a range of values in interval [0-255], where 0 indicates lowest load and 255 indicates highest load of 1 packet per downlink opportunity.
5. GWID
6. Link Allocation duration
JOIN-RESP 0x0 / 0x22F / 0x3 / GW / End Device / SID_SEC_KEY_WAN_JOIN_RESP_GCM_128 JOIN-RESP message carries assigned schedule, i.e. A-UL and A-DL for the FSK-WAN-EN.
1. Request Accepted/Rejected (If rejected no other information should be there)
2. Uplink Schedule: Offset and Periodicity
3. Uplink Contention Param: Sub-slot window size, Slot window size
4. Downlink Schedule: Offset and Periodicity
5. Link Allocation duration
AUTH-RESP 0xFF / 0xD / 0x1 / Cloud / GW / SID_SEC_KEY_WAN_GCM_128 1. A boolean accepting and rejecting the request
2. JOIN-REQ contents:
  a. R-TX-ID of the requesting Endpoint
  b. UL
3. Uplink Link-Latency Characteristics:
  a. Uplink Load Characteristics
  b. DL
4. Downlink Link-Latency Characteristics
5. Downlink Load Characteristics
6. One time key to be used for downlink encryption/authentication
7. Link Allocation duration
8. SID_SEC_KEY_WAN_JOIN_RESP_GCM_128 key of the Endpoint

Table A.1 Information content of the synchronous mode profile's connection establishment commands


Back to top

©2023 Amazon.com, Inc. or its affiliates (collectively, “Amazon”). All Rights Reserved.