Multi-radio Test Cases

Test Case ID: MULTI/EN/API/INIT/BV-01: Switch between 900MHz and BLE stack multiple times

Field	Value
Case ID	C103619216
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Initialize LoRa stack and wait for time sync: `sid deinit` `sid init 3` `sid start`	`CMD: ERR: 0` `EVENT SID STATUS: State: 0, Reg: 0, Time: 0, Link_Mask: 4` Key check: Time sync received (Time: 0)
2	Switch to BLE stack and wait for time sync: `sid deinit` `sid init 1` `sid start`	`CMD: ERR: 0` `EVENT SID STATUS: State: 0, Reg: 0, Time: 0, Link_Mask: 1` Key check: Time sync received (Time: 0)
3	Switch back to LoRa and wait for time sync: `sid deinit` `sid init 3` `sid start`	`CMD: ERR: 0` `EVENT SID STATUS: State: 0, Reg: 0, Time: 0, Link_Mask: 4` Key check: Time sync received (Time: 0)
4	Switch back to BLE and wait for time sync: `sid deinit` `sid init 1` `sid start`	`CMD: ERR: 0` `EVENT SID STATUS: State: 0, Reg: 0, Time: 0, Link_Mask: 1` Key check: Time sync received (Time: 0)

Test Case ID: MULTI/EN/CONN/DL/BV-01: End Node is able to receive a downlink packet using BLE

Field	Value
Case ID	C103619222
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected, then set connection request: `sid conn_req 1`	`CMD: ERR: 0` `EVENT SID STATUS LINK MODE: LORA: 0, FSK: 0, BLE: 1` Key check: BLE: 1 (connected)
2	Send UL packet through BLE: `sid send -l 1 TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 1 LINK_MODE: 1` Key check: LINK: 1 (BLE)
3	Send DL packet from AWS IoT	`EVENT SID RECEIVED: TYPE: <type>, ID: <id>, LEN: 4, LINK: 1, LINK_MODE: 1, ACK_REQUESTED: 0, ACK: 0, DUP: 0, RSSI: <rssi>, SNR: <snr> Data: 54455354` Key check: LINK: 1 (BLE), data received

Test Case ID: MULTI/EN/CONN/DL/BV-02: End Node is able to receive a downlink packet using LoRa

Field	Value
Case ID	C103619223
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected: `sid last_status`	`EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 0` Key check: BLE: 0 (disconnected)
2	Send UL packet through LoRa: `sid send -l 3 TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 4 LINK_MODE: 1` Key check: LINK: 4 (LoRa)
3	Send DL packet from AWS IoT	`EVENT SID RECEIVED: TYPE: <type>, ID: <id>, LEN: 4, LINK: 4, LINK_MODE: 1, ACK_REQUESTED: 0, ACK: 0, DUP: 0, RSSI: <rssi>, SNR: <snr> Data: 54455354` Key check: LINK: 4 (LoRa), data received

Test Case ID: MULTI/EN/CONN/DL/BV-03: End Node is able to receive a downlink packet using LoRa, while BLE connection with Gateway is established

Field	Value
Case ID	C103619224
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected, then set connection request: `sid conn_req 1`	`CMD: ERR: 0` `EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 1` Key check: BLE: 1 (connected), LoRa: 1 (active)
2	While BLE connection is active, send UL packet through LoRa: `sid send -l 3 TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 4 LINK_MODE: 1` Key check: LINK: 4 (LoRa)
3	Send DL packet from AWS IoT	`EVENT SID RECEIVED: TYPE: <type>, ID: <id>, LEN: 4, LINK: 4, LINK_MODE: 1, ACK_REQUESTED: 0, ACK: 0, DUP: 0, RSSI: <rssi>, SNR: <snr> Data: 54455354` Key check: LINK: 4 (LoRa), data received

Test Case ID: MULTI/EN/CONN/SEND-LINK/BV-01: UL performed through BLE, when send_link 0 and active BT connection

Field	Value
Case ID	C103619217
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected, then set connection request: `sid conn_req 1`	`CMD: ERR: 0` `EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 1` Key check: BLE: 1 (connected)
2	Send UL with send_link=0 (any): `sid send TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 1 LINK_MODE: 1` Key check: LINK: 1 (BLE auto-selected when BLE connected)

Test Case ID: MULTI/EN/CONN/SEND-LINK/BV-02: UL performed through BLE, when send_link 1 and active BT connection

Field	Value
Case ID	C103619218
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected, then set connection request: `sid conn_req 1`	`CMD: ERR: 0` `EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 1` Key check: BLE: 1 (connected)
2	Send UL with send_link=1 (BLE): `sid send -l 1 TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 1 LINK_MODE: 1` Key check: LINK: 1 (BLE)

Test Case ID: MULTI/EN/CONN/SEND-LINK/BV-03: UL performed through LoRa, when send_link 3 and active BT connection

Field	Value
Case ID	C103619219
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected, then set connection request: `sid conn_req 1`	`CMD: ERR: 0` `EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 1` Key check: BLE: 1 (connected)
2	Send UL with send_link=3 (LoRa): `sid send -l 3 TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 4 LINK_MODE: 1` Key check: LINK: 4 (LoRa, forced even with BLE connected)

Test Case ID: MULTI/EN/CONN/SEND-LINK/BV-04: UL performed through LoRa, when send_link 0 and terminated BT connection

Field	Value
Case ID	C103619220
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected: `sid last_status`	`EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 0` Key check: BLE: 0 (disconnected)
2	Send UL with send_link=0 (any): `sid send TEST`	`CMD: ERR: 0 TYPE: 2 ID: <id>` `EVENT SID SEND STATUS: SID ERR: 0, TYPE: 2, ID: <id>, LINK: 4 LINK_MODE: 1` Key check: LINK: 4 (LoRa auto-selected when BLE disconnected)

Test Case ID: MULTI/EN/CONN/SEND-LINK/BV-05: Uplink not performed, when send_link 1 and terminated BT connection

Field	Value
Case ID	C103619221
Executable by Customer	Yes

Preconditions

EN is registered in Sidewalk network
EN has time synchronized
Multi-radio stack initialized (BLE + LoRa)
(Preconditions to be provided.)

Test Steps

Step	Description	Expected Result
1	Verify BLE is disconnected: `sid last_status`	`EVENT SID STATUS LINK MODE: LORA: 1, FSK: 0, BLE: 0` Key check: BLE: 0 (disconnected)
2	Send UL with send_link=1 (BLE) while BLE is disconnected: `sid send -l 1 TEST`	No `EVENT SID SEND STATUS` received Key check: UL not sent (BLE link not available)